Showing posts with label looms. Show all posts
Showing posts with label looms. Show all posts

Monday, 2 January 2017

Toyoda and the Japanese industrial revolution

Toyoda Model G loom, Science Museum, London

In previous posts I've discussed Toyoda looms in relation to the silly myth that Japanese denim mills somehow acquired "old Levi's looms", a claim that was first used in relation to Evisu.

But Toyoda looms are fascinating for many reasons. Not only are they still weaving some of the world's finest denim today, at Kurabo, Nihon Menpu and many other mills, they also mark the birth of Japanese industry.

In Japan, the career of Sakichi Toyoda is justly celebrated. Sakichi first developed a power loom around 1897; this design was further developed by  Kiichiro Toyoda, with Rizo Suzuki and Risaburo Oshimo, who eventually perfected the design as the Toyoda Model G loom, in July 1924. "Automatic" means that the loom changes shuttles - the large bobbins which carry the white, 'fill' yarn for denim - automatically, which allows a single operator to supervise 12 or 20 looms, rather than one or two.

Toyoda Model G looms at the Kurabo mill, Kurashiki
Toyoda looms at the Kurabo Mill, Kurashiki
Other manufacturers, including the Draper Corporation, had already developed Automatic Looms, notably the Draper Northrop, produced as early as 1897 but which seems to have only become widespread after 1915 or so. But the Toyoda G apparently allowed for bobbin change with the loom still running, it was reputedly more reliable and physically compact than its rivals, and included a failsafe mechanism, which meant the operator couldn't insert the bobbin in the wrong configuration. Consequently, it became one of the first Japanese industrial designs to be widely exported, thanks to a partnership with Britain's Pratt Brothers, a huge producer of textiles machinery, who licensed the design.

The profits generated by the Model G helped finance the development of a motor car, and the creation of what we know today as the Toyota industrial corporation. The Model G's significance is marked by the inclusion of an early model in a prominent location at London's Science Museum. The Model G loom shown here is the one in London.

It's hard to know how many Model G looms are still in operation; I know they are still in use at Nihon Menpu (a historic photo here shows them in the mill in the 1920s). Toyoda shuttle looms are in use at most of the well-known Japanese mills, most of which will have a combination of older and newer machinery. The growth of Kurabo, once of Japan's biggest textiles producers, was powered by Toyoda; period photos show dozens of Model G looms in the factory, alongside imported machinery, by Pratt Brothers and others. We know that the fabric for the first Evisu jeans was made on Toyoda looms at Kurabo - so as well as helping launch the industrial revolution in Japan, powering one of the country's key export successes, the Toyoda Model G was crucial to today's fascination with selvedge denim.




Automatic Bobbin Change mechanism
Toyoda looms at Nihon Menpu, circa 1920s.




The exterior of Kurabo Mill in Kurasghiki, an industrial giant powered by Toyoda.



The Platt Toyoda-licensed loom, built in Oldham.




Wednesday, 11 May 2016

Gripping yarns: a Q&A with Cone's Allen Little




 Denim nerds love talking about selvage edges, and looms. But really when we're do so, we're overlooking something more vital: the yarns. Different looms do have a different effect - but really, it's the yarns that contribute more to the character of denim and how it wears in. 

That's why I was excited to spend hours on the phone with Allen Little, who's undoubtedly one of the world's leading yarn experts. Allen works for Cone, a company that is currently celebrating its 125th anniversary. Cone produce an incredible variety of vintage-style denims, all made on their old Draper looms. But each of those individual denims, will have a specific yarn. Cone are unusual in this respect; although we often think of Japanese mills as boutique operations, they usually buy in their yarns from outside suppliers. Cone, in contrast, design their own. 

Most of us know that many denim manufacturers turned to Open End spinning in the 1980s, and this lost us a lot of character, because the denim was simply too smooth and even.  Hence, from the late 1980s onwards, there was a return to Ring Spun yarn. But beyond the use of Ring Spun yarn, there is almost an infinite variety in the look of what's available. Here Allen gives us an overview of how he reproduces specific yarns of specific eras.

As there's so much information to absorb, I'm running this Q&A in two sections. I will run the second part - which cover hairiness, cotton staple length, and the fiction of 'unbleached cotton' next week. 

The main photos here are from Farhad Samari , from the Inventory story we did together. 


Tell me about your background - I know your roots in the fabrics industry go deep.
I grew up in Wadesboro, North Carolina, and my family had spinning plants, spinning mills, way before I was born, a mill called Little Cotton Manufacturing . So I grew up in that environment – as a boy they allowed me to sweep the floors, I was surrounded by Whitin Spinning Frames. I went on to a textile career and decided to go more into the machinery and design side. So I joined Amsler Tech in Switzerland, a machinery company which make fancy yarn attachments and devices which are primarily aimed at denim; I spent around 10 years travelling round the world, teaching people how to use the machines and how to design the look they were aiming for. Then I came to Cone, which was a very big customer of this company - so finally I came back home, around [11] years ago.

Amsler software and controls are a very modern way of making yarns that look old-fashioned. How has the potential of their systems changed over the years?
It all developed over time. It started as a very crude technology and slub spinning was not really highly regarded. Denim and upholstery were the first things that went into it. Then as denim went from workwear into fashion there was an explosion of the demand. Everything became more complicated, the computer controlling other machines became more complex, the programming became more complex.

It used to be slub spinning was very simple; you just put a thick place in the yarn, and there was not much designing behind it. Then in the '80s the designing became more important. At the beginning, there weren't many people who knew how to design the yarn to give a certain aesthetic for a fabric. So that's what I was fascinated with.. and wondered if I could figure out how to design something that looked really nice and vintage-like, as I was training people how to use the machine. You had to learn how they operated, you also had to learn about also what old denim looked like, and I guess from there the software, and the controls of the slub devices kept advancing until now we've reached the point where it's highly computerised, and some of the designs for software packages that go with the machines are really quite amazing.

Tell me how you'd go about mimicking the yarn on a vintage-style denim. For instance, on LVC most of the denim is loomed in essentially the same way, so it's the yarn and the dyeing that defines the different fabrics. One of my favourite denims you've produced is the LVC 1915; a fabric that's authentic, vintage-looking but subtle. I assume that's one of your yarns - how did you go about developing it?
Yes, I designed that yarn. We were looking at [old] garments… we couldn't cut them apart 'cos they were quite valuable, but we know where the fabric comes from. You had to go back and think about the lack of control we had in the old day. So you're trying to take a computerised system to replicate a lack of control. The uneven-ness that came with the old type of spinning, this unevenness was random. You had many types of problems with the old spinning. Sometimes you had very long uneven sections of the yarn, sometimes you had very short uneven sections. Sometimes you have yarns that are more hairy than other ones. So we had to design yarn to replicate all of that. This particular yarn, we focused on three or four elements we had to reproduce, for each part of the aesthetic value we were looking for.

Looking specifically at LVC which has a wide variety of denim. We have 1915, then for instance, the early '30s, then we're on to wartime denim... was there a different yarn for every one?
We have some that are just different in proportion. They have different arrangements, there are one or two yarns common to some constructions, you learn in the old spinning what your main unevenness factor is, [and] that becomes a staple for some. Depending on where the yarns were made, it really depends on the time era and quality of cotton for a particular build at that time. So each one is unique in its design, but there is some overlapping.

Was recreating a duck fabric hard?
The denim is much more complex. The duck fabric, we did a few tricks to design that but no, from our perspective it was a simpler fabric. We took the same approach, as with anything else you try and mimic, thinking about how it was made originally. Trying to get the colour correct and some natural character to the duck fabric took some work, but it wasn't as difficult as the denim. We've been doing vintage for so long we have the arsenal of tools to do that, and that was more about coming up with a construction, using our existing tools.

In the pre-war Levi's, how radically was the spinning technology changing? If we take, say, the 1915 and the 1937, is there much difference?
There's not so much between them. The bigger advances in spinning were made later.. but back in the very early days things were produced very slowly. As you move from one era to another the yarns are getting a little bit better - but when I say better I don't mean good. The oldest denim is going to be the most uneven, with the most character but they're the hardest denim to reproduce, due to a variety of things. You've got to think about how a mill was powered, for instance if you're running water power, speed and things like that can change. So the denim got better as the years went along – but it wasn't good, technically

In 1940 vs 1915 there are differences in the denim, the ones from 1940 will be better, for instance the dyeing – they learned more about dyeing techniques as time moved on. It presents a challenge, but I think we've done a good job. You just have to try to put yourself back in time, read books about how things used to be done, plus there are old records from Cone, in our archives, and you have make interpretations of all of that.

Obviously the spinning technology was constantly improving. But in the late '50s and '60s you would have introduced Magnadraft spinning, and on that the magnets would have deteriorated over time. How did that affect the look of the denim?
When Magnadraft was working well, with magnets having all the power, it was much better The older denim, the cotton was not prepared as well, it has issues with neps and and parts of cotton left into the yearn, and that all changed during the Magnadraft era as the carding machines did a better job. We created a special yarn to simulate the issues with the Magnadraft, as the magnets lose their power - they don't have as much grip and it creates some unevenness. And that was a random effect. You've got to think a warp of denim is made from many different yarns, obviously we can't reproduce a 1000 different yarns to reproduce the different strengths of the magnets, but we can program it where it looks like it has. And that's a very special unevenness. Because of course this Magnadraft look is a nice look if you're into vintage.


Monday, 11 June 2012

Mildred, the Lady at the Loom

I've been lucky enough to interview a fair number of big shots in the denim industry - but there's one crucial person I haven't got to so far. One day. Here she is on a CBS news segment, the incomparable Mildred "Mickey" Bolen.


Wednesday, 25 January 2012

Bud Strickland, Cone, and the magnetic appeal of 60s denim

The White Oak Weave Room, Cone, 1925

I've been wanting to track down Bud Strickland for some time - but as the new Denim Director, Product Development, of Cone, he's a busy man. He has a significant historical legacy to uphold - and to keep profitable! Cone resuscitated all their Draper selvage looms in 1992; at first, their selvage denim was produced exclusively for Levi's, with whom Cone have a relationship that stretches back a few years shy of a century, but in recent years Levi's have allowed Cone to keep the looms busy by producing denim for other companies, too (although the Levi's-style Shrink To Fit fabric remains exclusive to them). Thus, Cone now produce denim and cotton duck for jeans manufacturers including Raleigh, Left Field and Barney's and their White Oak plant is busier than ever: hence, Bud would like still more Draper looms. It's not just about business, though - any denim old hand would agree with him when he says: "There is something about them. They are special."

 The factory floor, White Oak, Greensboro


I've seen a lot of people, including Left Field and Roy Slaper, picking up on your indigo canvas recently. Is it becoming a bigger part of your output?
It's just one of many nice looking fabrics we have coming off the old looms. We figured out a way to actually get an indigo dyed rope transfer onto the packages that could be used as fill yarn. I don't say it's been a huge volume item because it’s not inexpensive but it does make a beautiful fabric.

A friend who works for a major jeans company said he'd been having problems with one department who were worried that indigo duck pants might rub off on furniture and attract legal problems! That the legal department fantasise of getting people to sign a disclaimer before they wear dark raw denim and especially the duck.
Absolutely. It's amazing.  The designers want the denim as dark and saturated as we possibly as we can get it. And indigo, I'm sorry, is just indigo! It's going to crock! As I'm sure you're aware, Levi's is coming up with what they're calling their International Fabric standard, so they can sell any fabric in any country.  One of the specs is really good crocking performance. You talk to the designers, and they want it darker, and you talk to the business side and they say, we can't get it past crocking! That's something that's going to have to be resolved.




 Cone indigo duck fabric


But what they say is good crocking, I might say is bad crocking - in that I might want it to crock!
Exactly. Of course we have heard stories about people with white leather seats in automobiles getting caught in the rain and having their dark jeans crock . But if the customer is knowledgeable they know how to handle it.

I know that Cone's various fabrics for the LVC replicas are very different from each other; the 47 fades in a very different way to the 55, likewise the 1915 and the 1933 denims look very different to each other. A lot of that is down to the warp yarn and how that's made, but I wondered how much is down to the looming. For instance, do you have the Draper looms set up differently for the 47 and 55 - although they're the same configuration, is there any difference in tension or other parameters?

The looms do tend to be set up the same way as far as tension goes.  You can play with the whip roll and tension, but by and large we like to keep it where we can reproduce it from day to day, that's the important thing, being able to get a look and reproduce it.

Obviously a lot of that specific character is in the yarn. And I know that when you repro'd the 60s denim you spent a lot of time trying to replicate that slight extra slubbiness from that period, which was the effect of Cone introducing a new spinning technique, Magnadraft. Can you tell me about Magnadraft and what it was?
Magnadaraft was touted to be the latest and greatest technology in its day. What it was, rather than having a lever hold tension on the rolls in the  the drafting zone where the roving is elongated in making the desired yarn size, weighted rolls were used.  The weighted rolls were magnetized and held in place by magnetic force.. So that's how Magnadraft came about.

Over time magnets can lose some of their power unless they're re-magnetised. You didn't really didn't know which rolls were providing a little more tension than other rolls, so you're starting to get all these variations within the yarn, just due to the the strength of the magnet changing over time. And of course, people didn't realize exactly what was happening until after the fact. And that 's where a lot of the yarn character came from.  It was a little bit more pronounced than the older technology, which from a technical standpoint turned out to be better. But from an aesthetic standpoint, of course, Magnadraft gave a look that everyone came to love.

Fantastic, thank you for that. This is superb geek information!
And that's still a look that we strive to match now. I don't know the exact dates when Magnadraft came in and out, I know it was used in the '60s, but by the time I arrived in the '80s it was long gone.



.
An original pair of late 60s Levi's 302, using yarn spun with the Magnadraft technique. This was as slubby as original Levi's fabric gets; it fades in a very subtle way compared to some current takes on vintage denim. 




















We always hear that in the late 70s Cone started putting more sulphur in the dye, partly because people wanted the colour to wash out more quickly. But do you think there were any major changes in the indigo, and the dyeing process, in the 50s and 60s?

I don't think there were. You hear a lot of stories about why sulphur started being used in the dye shade. The one I hear most often is that when we had the 1973 oil embargo, the price of anything petroleum based - including, of course, synthetic indigo - sky rocketed. So they started using sulphur as a way to stretch the indigo.  There were also shortages of indigo, because that was also the time denim started being really popular as an every day fabric – a lot more people started getting into the business and the supply got tight. So the price of indigo went up, supply got limited, and sulphurs were being used as an extender to the shade. Back then of course everything was being sold rigid.. Then when people started washing, I think the laundries figured early on out they could get different effects because the sulphur was there. And that to me is the interesting part of it, that by chance you make a change and down the road someone figures out how to take advantage of the change. That to me is what happened with sulphurs.
 
 












How it used to be done: ring spinning at Cone, circa 1907.







Nowadays, of course, you're simulating the Magnadraft spinning inconsistencies, by programming the yarns with a computerised spinning system. What is the system and how does it work?
Yes, it is programmed.. We use a computerised system that can make slubs, we can control the number of slubs, the thickness of slubs, the length of the slubs, the frequency of the slubs, and combine different slubs in one yarn. The system we use is made by Amsler. It's a Swiss-made system. There are others on the market but that's the one we use - it allows us to engineer the yarns to reproduce those looks.

You mentioned before that your sources for cotton in the old days were likely much the same as they are today. And where does your cotton come from today?

It is American cotton, primarily from the Delta region. Which is the Mississippi river states, and then of course there's Texas cotton.

Recently we've seen people push, say, Texas cotton as having a particular look, is it different, or is that marketing speak?
I think it is, in that there's so much variation anyway. Cotton varies from field to field, region to region, year to year. Every year we buy and cotton and do what we call lay-downs, we open a large number of bales at one time, we put them down in a way we average same attributes of length, and strength from the beginning of the cotton season to the end so we have consistency over that year. That's not to say it doesn't change the next year, because growing conditions change, it might have been a dry year, it might have been a wet year.

Some people associate hairy cotton with being higher quality. But isn't it true that in the old days, hairy cotton was seen as being poorer quality, because it was shorter staple?
The shorter the staple, the hairier you'll see it, that's true. And we do have requests on shuttle fabric from customer, not to be singed, because they want that hairy look.

I've been reading a wonderful book by Richard Porcher on the history of Sea Island cotton, this fabled, lost stuff from the 20s. Do you think any of this long-staple cotton made it into Cone denim at that time?
My guess would be probably not – because even in those times it was a premium cotton and you don't make denim out of premium cotton, you save that for your fine yarns, that need long fibres and a lot of strength. They may have but I have no way of knowing.

What are your plans for shuttle fabric from the White Oak plant over the coming year?
Basically, we're here to serve our customers, whatever looks they're trying to recreate or match form old jeans or old fabrics. we will continue to work with them any way we can. Right now our shuttle loom business is very, very strong, it's one of those situations where I wish we had a few more shuttle looms right now. We're very proud of the fabrics we've got coming off right now.

I've seen a lot more interest in cotton duck aka canvas over the last few years, are you seeing more demand for more?
We've been making it on a fairly steady basis for quite a few years now. I don't see that changing.

Do you define duck and canvas as being the same fabric?
I look at them as being one and the same. It's just a matter of definition. Some people they get all hot and bothered about it, but it's one and the same. For other end users, duck may have been set up to make it more waterproof - if you were making outer wear, you might have might have a much higher sley, ends per inch. But what was coming out of a denim mill was going in to workwear, and there was not any difference.

What new projects do Cone have coming up?
This does not apply to the shuttle looms but there's a lot of press, a lot of excitement, about recycled content in fabrics. And we are planning something in that area, I can't reveal exactly what right now.

What a great example of What goes around, Comes around. Because in the 1920s there was a recession, cotton prices went through the roof, and Levi's introduced the 333, which used a lot of recycled fibres in the yarns.
Right. I like going on along those lines.

You mentioned that you with the demand for more shuttle fabrics, you don't have enough looms to meet denim. So if anyone has any Draper looms knocking around, they should give you a call?

Absolutely!






















All period shots are courtesy of Cone Denim, a division of International Textile Group, Inc, and are their copyright. Used with thanks.

Thursday, 12 January 2012

Drapers in the Field

This was the title of a sad photo that was sent to me last year by a gentleman named Robert. But it also has an upbeat message.

The photo is of a Draper loom (an X-2?) rusting quietly away in a field somewhere in the USA. This, and a couple of companions, is one of perhaps 100, 000 shuttle looms in use in the country, which were scrapped or otherwise disposed of, in favour of more efficient projectile looms. Cone, the last surviving US mill producing shuttle denim, decommissioned most of its looms in 1985, but retained a good number of the X-3 version, which produced 42 inch fabric (they were converted to produce 28 inch when brought back into use around 1992).

According to Ralph Tharpe, previously head of technical development at Cone, "The executive in charge of disposing of the looms in 1985 told me they ended up in a field and as far as he knew they were scrapped for the metal." So this sad wreck might well be from Cone, a loom used to produce fabric for some of the most fabled denim of all time. 


Why is there an upbeat message to this sad story? It's contained in Robert's second photo: 




These are two more Drapers, X-3 I believe, which were rescued by Robert. Because there are other companies making selvage fabric in the USA still - but not denim.

Robert works for a high-tech company in New England which produces materials for the aerospace industry. These looms have found a new home weaving kevlar - because they are gentle on the yarn, imposing little tension, and don't chop it at the selvage point, these 70-year old looms are the most efficient technical solution to a very modern technical problem. They also show how, even as old industries disappear, new industries can spring up to replace them.

The fabric woven by these looms could well be life-saving. One of its prime uses is to shroud aircraft engines; if there's a turbine failure the containment ring made up of this fabric is designed to prevent the high-velocity turbine debris from damaging the aircraft.

These looms were made in Hopedale, Massachusetts, by the Draper Corporation, which in itself made a major contribution to sweeping economic changes across the USA - by making more efficient looms, and funding mills in the South, Draper contributed to the move of fabric production out of New England. (One consequence of this was that Levi's changed their denim supplier, from Amoskeag in New Hampshire to Cone in North Carolina). Now, as another result of sweeping economic changes, these looms have come home.

Thanks to Robert for the photos and the story.


Tuesday, 10 January 2012

Toyoda Looms, and Coals to Newcastle

I though it was a folk-tale that had been laid to rest, but even recently I've noticed writers in Mens File, The Daily Telegraph , various retailers and other places perpetuate the myth that the Japanese premium denim industry started out weaving denim using looms from America. The reason for this canard is pretty simple: I believe it was a tale initially spun by Hidehiko Yamane, founder of Evis, aka Evisu, as a nice story. Around 2000, he told me he'd brought an old Levi's loom back to Japan to produce denim; when I pointed out that Levi's had never owned any looms, he corrected his story (via a British PR) to say he "brought back a loom from an American mill." It was a nice story, since copied by others like PRPS, of how a Japanese craft industry had picked up an American tradition, but I don't believe it's true. I don't believe any significant amount of Japanese selvage denim was made on American looms. Because selvage denim is very much a Japanese tradition. This video explains why:

Toyoda, the predecessors of the Toyota car company, were a leading producer of shuttle looms from 1924, when Sakichi Toyoda developed the Model G Automatic loom. This invention is a crucial part of Japan's industrial heritage. It was such a good design that it was exported widely, and produced under licence in the UK. Toyoda shuttle looms were still in widespread use in the 1970s, in particular at the Kurabo mill. And it was, one of Evis's early backers told me, Kurabo who produced the first Evis fabric. If Hidehiko Yamane did own a "Levi's loom" it was a conversation piece.

Looms are very heavy and complex items. Why, when you have a large number of high-quality selvage looms in Japanese mills, would you ship over and use an American loom? Kurabo have stated to me that their shuttle looms were made by Toyoda. And Cone, who made denim for Levi's, reckon any of their Draper looms rendered surplus to requirements in the 1980s went off for scrap, not for export. Some disused Draper looms have gone on to fascinating destinations, as I will detail at some other time, but I don't believe that any were used for quantity production in Japan. With a huge base of efficient Japanese looms already in situ that would be, as the saying goes, taking Coals To Newcastle.

Incidentally, although I've not had verification, I've been told that the later Toyoda and Sakamoto looms could be configured to produce fabrics in variable widths. This is perhaps a reason why more survived - several US mills scrapped their narrow 28 inch looms, but retained the 1950s shuttle models, like the Draper X-2, which produced fabric in the more efficient 42 inch width (that's one of the reason later Lee jeans have only one selvage line on the busted seam).  One denim luminary recently accused me of being a loom geek. It's true. Send me your photos of looms in situ, or abandoned, American or Japanese. Check out photos of "American looms" that turn out to be Sakamoto, here. And if you have photos of American looms in Japan, please prove me wrong!

Toyoda have a rich history, it's silly to credit the Americans with their achievements, so let's drop this silly marketing myth.